Repair mortar Product List and Ranking from 4 Manufacturers, Suppliers and Companies

Repair mortar Product List

1～9 item / All 9 items

Displayed results
Slope Repair and Reinforcement Material "Naoshi Taru NF"

Slope Repair and Reinforcement Material "Naoshi Taru NF"

High thixotropic type! Introduction of non-shrink special polymer-based sectional repair mortar material.

"Naoshitaru NF" is a premixed type mortar material for cross-section repair that uses a special polymer. It has excellent adhesion strength and high non-shrinkage performance. It can be applied using either spray or trowel methods. Due to the use of special polymers, it excels in resistance to macrocell corrosion caused by potential differences between the repair area and concrete, as well as in durability against freeze-thaw resistance. 【Features】 ■ High thixotropic properties allow for easy thick application. ■ Can be applied using either spray or trowel methods. ■ Excellent resistance to macrocell corrosion due to potential differences between the repair area and concrete, thanks to the use of special polymers. ■ Superior durability, including freeze-thaw resistance. ■ High non-shrinkage performance. *For more details, please feel free to contact us.

  • Slope protection material
  • Reinforcement and repair materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Concrete structure cross-section repair mortar "U-Repair Patch EX"

Concrete structure cross-section repair mortar "U-Repair Patch EX"

The shrinkage is very small! A composite type cross-section repair material with extremely fast strength development.

The "U-Repair Patch EX" is an all-premix type repair material for cross-section restoration that exhibits extremely rapid strength development. Its performance is fully demonstrated in emergency repairs that require early opening and in the repair of structures that are in use. It can also accommodate thick applications by applying multiple layers in a short time. Additionally, it has very low shrinkage and stable dimensional changes, which gives it excellent crack resistance. 【Features】 ■ Can be applied in layers of approximately 5mm to 20mm using trowel application ■ All-premix type (single-component) ■ Lightweight and fast-setting type, making it excellent for application on ceiling surfaces and similar areas ■ Achieves over 5N/mm² within 5 hours after application even in winter conditions (at 5°C) ■ Despite being a fast-setting type, it has a usable time equivalent to conventional products *For more details, please refer to the PDF document or feel free to contact us.

  • Mortar and plaster materials
  • Cement mortar coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Naoshitaru N

Naoshitaru N

High thixotropic type non-polymer non-shrink cross-section repair mortar material, capable of ultra-thick application exceeding 10 cm in a single spray.

"Naoshi Tar N" is a premixed type of mortar for sectional repair that does not use polymers and can be used by adding a specified amount of water and mixing it during use. It can be applied using spray application methods, and spraying is possible on the first floor at heights exceeding 10 cm. For surface finishing, trowel finishing can be performed, allowing for a typical concrete surface finish. As an example of use, it can be applied without using formwork during RC thickening construction, making it cost-effective and allowing for quick application. It is a non-polymer resin mortar with excellent thixotropic properties, enabling easy flat finishing with trowel work, while not causing sagging during spraying.

  • Mortar and plaster materials
  • Bridge Construction
  • Plastering and painting work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Repair Star Series

Repair Star Series

Introducing Repair Star with a lineup that can be chosen for civil engineering, construction, and injection use!

"Repair Star☆NF (for civil engineering)" is a premixed type of sectional repair mortar that can be used by adding a specified amount of water and mixing it during use. It excels in workability, durability, and fire resistance, and demonstrates its performance in a wide range of applications including repair and reinforcement work for bridges and tunnels, seismic reinforcement work in civil engineering and construction, and repair work for marine structures (electrolytic corrosion protection). Additionally, we offer "Repair Star☆NP" for construction use and "Repair Star☆G" for injection purposes. 【Features】 <Repair Star☆N> ■ Can be applied using either plastering methods or wet spraying methods ■ Excellent salt resistance, suitable for repair of marine structures and countermeasures against salt damage ■ Superior resistance to carbonation, freeze-thaw damage, and fire ■ Due to its inorganic material composition, it has physical properties close to concrete ■ Excellent adhesion performance, high strength, and crack resistance *For more details, please refer to the PDF document or feel free to contact us.

  • paint
  • Renovation and repair methods
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Concrete structure cross-section repair mortar "U-Repair Patch AP"

Concrete structure cross-section repair mortar "U-Repair Patch AP"

Just mix with water to achieve stable performance! General-purpose mortar for repairing cross-sections of concrete structures.

The "U-Repair Patch AP" is an all-purpose type polymer cement mortar designed for cross-section repair, focusing on ease of use on-site. It demonstrates stable performance simply by mixing with water. It has excellent troweling workability, allowing for a coating thickness of 40mm on walls in just one day. Additionally, it has very low shrinkage, stable dimensional changes, and is reinforced with special fibers, making it highly resistant to cracking. 【Features】 ■ Just mix with water on-site ■ Excellent troweling workability, allowing for a coating thickness of 40mm on walls in just one day ■ Spraying application is also possible ■ Very low shrinkage and stable dimensional changes ■ Highly resistant to cracking due to special fiber reinforcement *For more details, please refer to the PDF materials or feel free to contact us.

  • Mortar and plaster materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
All-Premix Cross-Section Repair Mortar 'U-Repair Flow'

All-Premix Cross-Section Repair Mortar 'U-Repair Flow'

Introducing a pouring type of mortar that excels in workability, durability, and crack resistance!

"U-Repair Flow" is a polymer cement mortar for all-premix type cross-section repairs. It has excellent fluidity and can fill narrow gaps. Additionally, compared to general fillers (grout materials), it has superior adhesion after curing, which can suppress re-deterioration and re-spalling after construction. 【Features】 ■ All-premix that only requires mixing with water on-site ■ Demonstrates sufficient fluidity, making it easy to fill fine gaps ■ Contains special fibers, providing excellent crack resistance ■ Very low shrinkage, ensuring stable dimensional changes after curing ■ Excellent adhesion to existing concrete after curing ■ Can suppress re-deterioration and re-spalling after construction *For more details, please refer to the PDF materials or feel free to contact us.

  • Mortar and plaster materials
  • Cement mortar coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Concrete structure cross-section repair mortar "U-Repair Light"

Concrete structure cross-section repair mortar "U-Repair Light"

We introduce a lightweight type of mortar that excels in workability, constructability, and crack resistance!

"U-Repair Light" is a polymer cement mortar for cross-section repair that excels in enhancing the durability of concrete structures and has excellent thick application properties. It is an all-premix type that only requires mixing with water on-site. Due to its lightweight nature, it offers excellent workability for trowel application and allows for a coating thickness of up to 40mm. Additionally, it has very low shrinkage and stable dimensional changes, making it highly resistant to cracking. [Features] - All-premix type that only requires mixing with water on-site - Lightweight type - Excellent workability for trowel application, allowing for a coating thickness of 40mm - Very low shrinkage - Highly resistant to cracking due to stable dimensional changes *For more details, please refer to the PDF document or feel free to contact us.

  • Mortar and plaster materials
  • Cement mortar coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Concrete structure cross-section repair mortar 'U-Repair Light EX'

Concrete structure cross-section repair mortar 'U-Repair Light EX'

Demonstrates performance for emergency repairs and maintenance of structures in use! It is a lightweight, fast-setting type of section repair material.

"U-Repair Light EX" is a lightweight polymer cement mortar with excellent strength development properties. It demonstrates its performance in emergency repairs requiring thick application on ceiling surfaces, early release, and repairs of structures in use. Due to its fast-setting nature, it also offers excellent workability for applications on ceiling surfaces and similar areas. 【Features】 - Can be applied with a trowel in thicknesses ranging from 5mm to 60mm - All-premix type (single component) for section repair - Lightweight and fast-setting, providing excellent workability for ceiling surfaces and similar areas - Achieves over 5N/mm² within 4 hours even in winter conditions (5°C environment) - Very low shrinkage, ensuring stable dimensional changes - Contains special fibers for superior crack resistance *For more details, please refer to the PDF document or feel free to contact us.

  • Mortar and plaster materials
  • Cement mortar coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Concrete structure cross-section repair mortar "U-Repair Patch CT"

Concrete structure cross-section repair mortar "U-Repair Patch CT"

"U-Repair Patch CT" is an all-premix type of repair material for salt damage restoration.

It has a high chloride ion penetration suppression effect and excellent salt damage resistance, making it ideal for the repair of coastal structures such as port facilities and structures in areas that use de-icing agents. 【Features】 ■ High chloride ion penetration suppression effect, improving durability. ■ Can be applied at a thickness of approximately 5-60mm on wall surfaces and 5-30mm on ceiling surfaces per layer. ■ Applicable to plastering and spraying methods. ■ Very low shrinkage and stable dimensional changes, resulting in excellent crack resistance.

  • Reinforced concrete construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.